Skip to content
Hardware Buddy IT Solutions logo

RAID 1, 5, 6 and 10 Explained: Which RAID Should You Use?

By Shubham Dobriyal · 12 November 2026 · 6 min read

When you set up a server or NAS, one of the first questions is which RAID level to use. The choice affects usable storage, speed, and how many drives can fail before you lose data. This guide explains the common levels in plain English.

What RAID does (and does not do)

RAID (Redundant Array of Independent Disks) combines several drives into one volume. Most RAID levels store extra information so the volume keeps working if a drive fails.

RAID is not a backup. It does not protect you from accidental deletion, ransomware, a failed RAID controller, fire or theft. You still need separate backups. See our 3-2-1 backup guide.

RAID 1: mirroring

  • Drives: 2
  • Usable space: one drive's capacity (50%)
  • Can survive: 1 drive failure
  • Good for: operating system drives on servers, and 2-bay NAS units

Both drives hold an identical copy. It is simple and dependable, but you pay for two drives and get the space of one.

RAID 5: striping with single parity

  • Drives: 3 or more
  • Usable space: total minus one drive
  • Can survive: 1 drive failure
  • Good for: small arrays of smaller drives where space matters

RAID 5 gives good usable space. The risk is during a rebuild: after one drive fails, the array is unprotected until the replacement drive is rebuilt, and rebuilding large drives can take many hours or days. A second failure in that window loses the volume. For this reason many admins avoid RAID 5 with large drives.

RAID 6: striping with double parity

  • Drives: 4 or more
  • Usable space: total minus two drives
  • Can survive: 2 drive failures
  • Good for: file servers and NAS with large drives, where capacity and safety both matter

RAID 6 keeps working even if a second drive fails during a rebuild. Write speed is lower than RAID 10, which matters less for file storage and backups.

RAID 10: mirrored pairs, striped

  • Drives: 4 or more (even number)
  • Usable space: 50%
  • Can survive: at least 1 drive failure, and more if the failed drives are in different mirror pairs
  • Good for: databases, virtual machines, Tally or ERP data, and anything that needs fast writes

RAID 10 offers strong performance and fast rebuilds, at the cost of half your raw capacity.

Synology SHR and QNAP options

Synology NAS devices also offer SHR (Synology Hybrid RAID), which makes better use of mixed drive sizes. SHR-1 tolerates one drive failure and SHR-2 tolerates two. QNAP supports standard RAID levels, and some QNAP models running QuTS hero use ZFS-based RAID options.

Quick recommendation

  • 2 drives: RAID 1
  • 4+ drives for file storage or backups: RAID 6 (or SHR-2)
  • 4+ drives for VMs and databases: RAID 10, ideally on SSDs
  • Server boot drive: RAID 1

Whatever you choose, enable drive health alerts so you know the moment a drive starts failing, and keep a spare drive ready for critical systems.

Related: SSD vs HDD for business storage and why every business needs a NAS backup solution.

Quick answers

Which RAID is best for a NAS? +

For 2 drives, RAID 1. For 4 or more drives used for file storage and backups, RAID 6 or Synology SHR-2 gives a good balance of space and protection.

Is RAID 5 safe? +

RAID 5 survives one drive failure, but the array is unprotected while it rebuilds. With large drives the rebuild takes longer, so many admins prefer RAID 6 or RAID 10.

Is RAID a backup? +

No. RAID protects against drive failure only. It does not protect against deletion, ransomware or device loss, so you still need separate backups.

Setting up a new server or NAS? We plan the RAID, drives and backups with you.

Tell us what you need. Get a clear quote.

Call or WhatsApp +91-8287980829, 24 hours a day, 7 days a week. Or send your requirement and we will get back to you.

Call WhatsApp Get Quote