Adding RAM is one of the easiest ways to give a server more life, especially when you add virtual machines or more Remote Desktop users. But server memory has rules that PC memory does not. Get them wrong and the server may not boot, may show memory errors, or may run slower than it should.
Step 1: find out what is installed now
Log in to iDRAC and look at the memory inventory, or check the server's system information. Note:
- Server model and generation (for example R640, R740 or R750)
- Number of processors
- Installed modules: size, type (RDIMM or LRDIMM), speed and rank
- Which slots are used and which are free
Step 2: understand the memory type
ECC registered memory
PowerEdge servers use ECC (error-correcting) registered memory. Normal desktop RAM will not work.
RDIMM vs LRDIMM
- RDIMM (registered) is the most common type and suits most servers.
- LRDIMM (load-reduced) allows larger capacities per module, used for very high memory configurations.
- Do not mix RDIMMs and LRDIMMs in the same server.
DDR generation
The generation depends on the server. Older generations such as the R620 and R720 use DDR3, the R630, R730, R640, R740 and R750 use DDR4, and the R760 uses DDR5. These are not interchangeable.
Step 3: follow the population rules
Each processor has several memory channels. For best performance, memory should be spread evenly across channels and across both processors in a dual-CPU server.
- Fill slots in the order given in the server's Installation and Service Manual (the slot labels are also printed on the board and under the lid).
- Install memory symmetrically for both processors.
- Prefer identical modules (same size, speed and rank) wherever possible.
- Filling all channels evenly usually gives the best memory bandwidth.
Step 4: speed and mixing
If modules of different speeds are installed, memory runs at the speed of the slowest module, and the processor and number of modules per channel can also limit speed. Mixing sizes is sometimes allowed but can reduce performance. The simplest approach is to match what is already installed, or replace all modules with a balanced new set.
Step 5: after installing
- Let the server run its memory training on first boot. It can take a few minutes.
- Check iDRAC and the Lifecycle Log for memory errors or warnings.
- Confirm the total RAM and speed in iDRAC and in the operating system.
How much RAM do you need?
It depends on the workload. Add up the memory for each VM or service, plus the host's own needs, and leave headroom for growth. For Remote Desktop servers, plan memory per concurrent user according to the applications they run.
Related: Dell PowerEdge R620 vs R630 vs R640 vs R730 vs R740 and VMware virtualization for business.
Quick answers
Can I use desktop RAM in a Dell server? +
No. Dell PowerEdge servers need ECC registered server memory (RDIMM or LRDIMM). Desktop RAM will not work.
Can I mix RDIMM and LRDIMM? +
No. RDIMMs and LRDIMMs should not be mixed in the same server.
Why is my server RAM running at a lower speed? +
Memory runs at the speed of the slowest module, and speed can also drop with more modules per channel or depending on the processor.
We supply server RAM, SSDs and SAS drives, checked for compatibility with your server model before supply.